Home > News Center > Industry News

Resistive touch screen and capacitive touch screen which is better
2018-11-19 15:31:25

Resistance touch screen and capacitance touch screen which good?


One:working principle of

    1.Resistive touch screen:The resistive touch screen consists of a top glass layer with a conductive coating and a polyester top sheet with a conductive coating on the bottom.The conductive surface is separated by an "insulating point," usually a bead of glass printed on a coated glass.

    2.Capacitive touch screenCapacitive touch screen is a four-layer glass screen surface,Laminated on a glass screen with ITO, the outer layer is a thin layer of quartz glass,The laminated ITO coating is a face, the four electrode leads are four corners, and the good shielding of the ITO inside ensures a good working environment.


Two:Touch sensitivity

    1.Resistive touch screen:Pressure is required to make contact with each layer of the screen,You can use a variety of touch media such as a pen, finger, and gloved hand.

    2.Capacitive touch screen:The slightest contact from an electrified finger can also activate the capacitor sensors below the screen.


Three:Accuracy

    1.Resistive touch screen:Accuracy reaches a single display pixel,Facilitates handwriting recognition,Helps operate under an interface that uses small control elements.

    2.Capacitive touch screen:Theory can reach several pixels,The actual contact area will be affected by restrictions。It is difficult to accurately click on a target of less than 1 cm.


Four:Multi-touch feasibility

    1.Resistive touch screen:Multi-touch is not supported

    2.Capacitive touch screen:Depending on implementation and software


Five:Damage resistance

    1.Resistive touch screen:The fundamental characteristics of the resistive screen determine that his top is soft,In this way the screen is very easy to scratch,Resistive screens require a protective film and relatively frequent calibration.

    2.Capacitive touch screen:ITO glass can be used for the outer layer.


Six:Clean

    1.Resistive touch screen:Use a stylus or nail to operate,It is not easy to leave fingerprints on the screen, oil stains.

    2.Capacitive touch screen:The entire finger touch, the outer layer of glass is easier to clean.