15" 5-wire resistive touch screen
The GreenTouch 5wire resistive touch screen uses the proven 5wire resistance technology, which is the best choice for high reliability, input flexibility and super anti-interference. It is touch-sensitive to achieve a variety of strong magnetic fields and strong electric fields. , complex lighting and other complex operations. The 5wire resistive touch screen with EETI control card or square display control card can run various operating systems perfectly, and can provide products of various sizes and customized product selection.
5 wire resistive touch screen operation principle:
The 5wire resistive touch screen consists of a glass bottom layer with a conductive coating and a cover layer with a conductive coating. The two layers are separated by tiny insulation points.
When a resistive touch screen is touched, the cover layer is bent to make electrical contact with the coating on the glass. The controller alternately separates the x and y axes on the glass layer with a 5 volt current and reads the resulting voltage from the cover, simulating the position of the touch from the change after the touch.
The raw materials of GreenTouch's 5wire resistive touch screen are all well-known brands in China, and are protected by FDS press-fits with different manufacturers' protective films. The result is a longer use of GreenTouch 5wire resistive touch screen. life. 5wire resistive touch screen is highly sealed to IP65 standards, and each touch screen is tested for 3H pencil hardness by ASTM D3363. Already have ROHS, CE and FCC international agency certification.
The 15.0-inch five-wire resistive touch screen displays a ratio of 4:3 and the touch screen structure is G+F. Dimensions: 322mmX247mm, viewing area: 310.5mmX236mm, drive area: 304mmX228mm. Display error is less than ±1%, 100000 touch points per square inch, FPC flexible cable length is 108mm, Portrait version, the interface is square socket with double row 2x5, 2x6 needle, diameter 0.0635mm.
15.0-inch five-wire resistive screen is packaged inside and outside the two-layer carton. The EPE foam is placed in the bottom of the inner carton to place the four-wire resistive screen into the EPE foam, and then the conventional foam is covered on the touch screen. After the inner carton is sealed, the five inner carton boxes are placed in a large outer casing, and the fragile label is attached to the outer carton. Touch screen size, how much determines how to package
The GreenTouch factory is located in the high-tech city of Shenzhen, China. It covers an area of more than 2,000 square meters and has a plant area of more than 1,700 square meters. GreenTouch's resistive touch screen, projected capacitive touch screen, infrared touch screen, projected capacitive touch film, touch display and touch All-in-one, touch digital signage and open touch displays are developed and produced here.
Sales terminal POS
Voting, ticket sales and lottery sales
Production control panel for automatic workshops/equipment
|EETI or Greentouch|
Finger, gloved, passive
resistance touch pen
|As below form|
Under sunlight , indoor
|USB or RS232|
Important Note :
If you need any technical support, or if you need I2C driver, please feel free to contact eeti.Concerning of technical issue, the related touch controller driver, please contact with eeti FAE team : email@example.com
(CE/FCC/ROHS certificate scan)
From now on, cooperate with GreenTouch. Contact sales (various links)
Web page navigation.